Industrial quality linear bearings with high precision. 25 PMI rails and 25 Flange sliders are used on every axis. 180 inch wall steel square tube welded in cnc cut jigs. The PHANTOM CNC SYSTEM T Series CNC uses. With cutting speed of up 500 inches ipm and free speed of 1000 ipm it is ideally suitable for processing of cabinets, wooden doors, solid wood furniture in a high speed shop. With 8 or 10 tools in a linear rack and a change over time that only takes about 8 seconds this is a very productive machine. This unique system can not only change the tools but uses a sensor to compensate for the tool length. The ATC router includes an automatic tool height system. A machine equipped with an ATC can perform operations normally done on other pieces of equipment, eliminating the need for additional machines in the shop. Signs and complex 3D carvings are a good example of this. The ATC feature allows our router to do the full job, even when different tooling is required to make different types of cuts. The PHANTOM CNC SYSTEM-ATC CNC machine reduces production time by automatically changing cutters between tool paths, thus eliminating the need for the CNC operator to change and zero tools individually. With a single tool spindle this operation can take valuable production time and introduces another point in the production process for human error to be introduced. Sometimes when using a CNC router to make cuts it is necessary to change out tooling.
0 Comments
Leave a Reply. |